PG22-DK2503A: EFM32PG22 Development Kit

Silicon Labs - PG22-DK2503A

The PG22 Dev Kit is a low cost, small form factor prototype and development platform for the EFM32PG22 microcontroller. The board is a small and cost-effective, feature-rich, prototype and development platform based on the EFM32™ microcontroller. The PG22 Dev Kit is an ideal platform for developing energy-friendly electronic devices. A built-in SEGGER J-Link debugger ensures easy debugging through the USB Micro-B connector. Most of the EFM32PG22 I/Os are routed to breakout pads on the sides of the board making it easy to expand on the board and evaluate the EFM32PG22's features with custom hardware.

Key features:
- EFM32PG22 microcontroller
- 32-bit ARM® Cortex®-M33 with 76.8 MHz maximum operating frequency
- 512 kB flash and 32 kB RAM
- Energy-efficient MCU core with low active and sleep currents
- Secure Boot with Root of Trust and Secure Loader (RTSL)
- Power control of on-board peripherals for ultra-low power operation
- Relative humidity and temperature sensor
- Ambient light sensor
- Hall effect sensor
- 6-axis inertial sensor
- PDM stereo microphones
- 8 Mbit serial flash
- User LED and push button
- 20-pin 2.54 mm breakout pads
- SEGGER J-Link on-board debugger
- Virtual COM port
- Mini Simplicity connector for AEM and virtual COM using external Silicon Labs debugger
- USB or coin cell battery powered

Includes:
- 1x PG22 Dev Kit board (BRD2503A)
- 1x USB Type A to Micro-B cable